germaivy.blogg.se - Cash register express manual hp monitor

CASH REGISTER EXPRESS MANUAL HP MONITOR DRIVERS

4 If you are attaching a DVI cable, connect one end of the 24-pin DVI cable (white connector) to the back of the monitor (select models only) and connect the other end to the computer DVI port. 2 Connect the built-ģ If you are attaching a VGA cable, connect one end of the 15-pin D-Sub VGA cable (blue connector) to the back of the monitor and connect the other end to the computer VGA port. If both cables are installed, the source of input can be selected using the Input Select option in the OSD menu. Connectors are found on the back of the monitor. To use DVI, your computer must have a DVI-compliant graphics card. CAUTION: To avoid breakage or other damage, do not touch the LCD screen while changing the tilt. 2 Adjust the tilt by moving the monitor’s top edge toward or away from you.

Īdjusting the Tilt For optimal viewing, adjust the screen tilt to your own preference, as follows: 1 Face the front of the monitor and hold the stand so that you do not topple the monitor while changing the tilt. CAUTION: To prevent damage, avoid applying pressure to the panel front. WARNING: Be careful to avoid pinching or scraping fingers when attaching the base. 4 Remove the pedestal from the panel (B). 3 Slide the pedestal to the left to unlock it from the base (A). 2 Set the panel face-down on a flat, protected surface. Removing the Base 1 Push the release tab and raise the pedestal off the base. WARNING: Be careful to avoid pinching or scraping 4 Lift the panel and lower the pedestal onto the base until the push tab locks. 3 Slide the pedestal to the right to lock it into place (B).

2 Align the pedestal slots with the panel tabs and insert (A). You can substantially increase the life expectancyīack to Contents Page Setup Base and Tilt � Cables � Wall Mounting Arm Base and Tilt Attaching the Base � Removing the Base � Adjusting the Tilt Attaching the Base 1 Set the panel face-down on a flat, protected surface.

Turn your monitor off when not in use.

Adjust only those controls that are described in the operating instructions.

If your monitor is not operating properly or has been dropped or damaged, contact your Hewlett-Packard authorized dealer, reseller, or service provider.

Do not open your monitor cabinet or attempt to service this product yourself.

Maintenance Guidelines To enhance the performance and extend the life of your monitor:

WARNING: To reduce the risk of electric shock or d For information on the correct power cord set to use with your monitor, see Power Cord Set Requirements. To use a different cord, use only a power source and connection compatible with this monitor. The sections are as follows: īack to Contents Page Safety and Maintenance Guidelines Important Safety Information � Safety Precautions � Maintenance Guidelines � Cleaning the Monitor Important Safety Information The power cord is designed for use with your monitor. It describes the monitor’s features, setup, and operation.

Notational Conventions About This Guide This guide is intended for anyone who uses the w19b / w19e / W19q LCD Monitor.

Nothing herein should be construed as constituting an addīack to Contents Page Preface About This Guide

Agency Regulatory Notices The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services.

CASH REGISTER EXPRESS MANUAL HP MONITOR DRIVERS

Installing Drivers and Using the Auto-Adjustment Feature.

W19b / w19e / W19q LCD Monitor User’s Guide